Producto anterior Producto siguiente

192 Accumulator SZ Chain Driven Zero Pressure Medium Duty Conveyor


SZD192CDA Conveyor

SPECIFICATIONS

TREAD ROLLERS: 1.9" dia. x 12 ga., model 192S.

CHAIN DRIVE: Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60 roller chain.

CHAIN GUARD: All chains are completely enclosed along the entire length of conveyor.


CENTER DRIVE: Drive either side mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units.


ROLLER CENTERS: 4" or 6" RC ONLY.

SPEED: 35 FPM, constant.


ACCUMULATION ZONE: 5'-0" zone lengths, zone singulation operation, photo electric sensor controlled zones with seperate drives on each zone.

 

BED: 6-1/2" x 1-1/2" x 10 ga. and 4-1/2" x 1-1/2" x 10 ga. formed steel channel frame. Bed sections are bolted together with butt couplings and floor supports.

 

FLOOR SUPPORTS: Optional


BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth seal.

 

FRL: Unit is provided with filter, regulator  and lubricator with 3/8" ports for 60 PSI operational pressure.

 

MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.


CAPACITY: 300 lbs./ft. up to a maximum of 1200 lb. pallet load.

 

ELECTRICAL CONTROLS: Optional

Publicado en Accumulation Conveyors
Etiquetado como