Producto anterior Producto siguiente

796 Accumulator Smart Zone Line Shaft Zero Pressure Conveyor

SZ796LSZ Conveyor


TREAD ROLLERS: 1.9" dia. x 16 ga. steel, model 196S grooved.


DRIVE BELT: 3/16" dia., polyurethane belts. Nominal 15 lbs. per roller drive.

DRIVE SHAFT: 1" dia. C1018 cold rolled steel shaft.

COUPLINGS: Couplings located both ends (type "A"), one end only (type "B" or "C") or none (type "D").


CENTER DRIVE: Located approximately 16-1/2" from end of bed section on 4" RC; 18" on 3" and 6" RC.


BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.


ACCUMULATION: Zone singulation operation; 2'-0" zone length, photoeye controlled.


SPEED: 60 FPM, constant.


BED: 7" x 1-1/2" x 12 ga. formed steel channel frame. Bed sections attached with splice plates and floor supports.



MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CHAIN: Drive shaft is driven by No. 50 chain. Chain take-up provided on motor base.


Publicado en Accumulation Conveyors
Etiquetado como