Producto siguiente

450 Box-Style Slider Bed Belt Conveyor


450BOS Conveyor

SPECIFICATIONS

BELTING: PVC-120 black.

DRIVE PULLEY:4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.

TAIL PULLEY: 4" dia., crowned, with 1-3/16" dia. shaft.

END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application.

TAKE-UP: Screw type unit at tail pulley provides 12" belt take-up.

BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable.

BELT SPEED: 60 FPM, constant.

BED: 4-1/2"" x 12 ga. channel frame with 14 ga. slider bed 9"-27" BF; 12 ga. bed 33" BF and above with bed pan braces.

FLOOR SUPPORTS: Optional

MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.Slider Beds, Slider Beds, Slider Beds, Slider Beds

SAFETY POP-OUT ROLLERS: Mounts into slot on bracket for safety design.  Use of connector bracket eliminates dangerous pinch points.

ELECTRICAL CONTROLS: Optional.

Publicado en Belt Conveyors
Etiquetado como