Producto anterior Producto siguiente

192 Chain Driven Medium Duty Live Roller Curve Conveyor


192CDLRC Conveyor

SPECIFICATIONS

TREAD ROLLERS: 1.9" dia. x 12 ga. steel, model 192S with sprockets.

CHAIN DRIVE:Roller to roller with No. 40 circular roller chain.

 

END DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.

CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor.

ROLLER CENTERS: 5" RC measured at outside radius of curve.

 

DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve).

 

SPEED: 45 FPM, constant.


BEARINGS: Removable type, zinc-plated, grease packed, labyrinth sealed.


BED: 5-1/2" x 1-1/2" x 10 ga. and 3-1/2" x 1-1/2" x 10 ga. formed steel channel frame.

FLOOR SUPPORTS: Optional

 

MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.


ELECTRICAL CONTROLS: Optional.

Publicado en Chain Driven Live
Etiquetado como