Producto anterior Producto siguiente

1200 Heavy Duty Plastic Belt Conveyor


HD1200PB Conveyor

SPECIFICATIONS

BELTING: Series 1200 flat top gray polypropylene belt.

DRIVE SPROCKETS: 10.2" pitch dia. with 2.5" square bore.

TAIL SPROCKETS: 10.2" pitch dia. with 2.5" square bore.

END DRIVE: Allows one-direction (unit) operation.


BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

 

BED: 7" x 1-1/2" x 7 ga. channel frame with open style bed construction and UHMW wearstrips mounted to longitudinal channels.

 

TAKE-UP: Catenary type located at discharge end.

 

RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable with rubber sleeves.


BELT SPEED: 35 FPM, constant.

 

FLOOR SUPPORTS: Optional.


MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.


ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.


ELECTRICAL CONTROLS: Optional

Publicado en Plastic Belt Conveyor
Etiquetado como