Belt Conveyors

Roller Beds The roller bed is well suited for transporting heavier unit loads with less horsepower than required by slider beds. Slider Beds The trough bed belt conveyor has an integrated guard rail which is ideal for trash conveyor, handling chips, slugs, scrap wood, paper waste, boxes, packages, and cartons. The standard slider bed belt conveyor is one of the most economical options for transporting conveyors. The box style slider bed is another option which provides a smooth surface along the side of the conveyor. The box style slider bed is ideal for workers stationed beside the conveyor.

700 Box Style Slider Bed Belt Conveyor Medium Duty (700BSB)



DRIVE PULLEY: 4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
TAIL PULLEY: 4" dia., crowned, with 1-3/16" dia. shaft.
END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application./p>
TAKE-UP: Screw type unit at tail pulley provides 12" belt take-up.
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable.
BELT SPEED: 60 FPM, constant.
BED:7" x 12 ga. channel frame with 14 ga. slider bed 9"-27" BF; 12 ga. bed 33" BF and above with bed pan braces.
FLOOR SUPPORTS: Optional
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
SAFETY POP-OUT ROLLERS: Standard on both ends, 1.9" dia x 16 ga. steel roller, model 196S.
ELECTRICAL CONTROLS: Optional.



700 Slider Bed Belt Conveyor Incline (700SBF)



BELTING: Black PVC rough-top.
DRIVE PULLEY: 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
TAIL PULLEY: 4" dia., crowned, with 1-3/16" dia. shaft.
CENTER DRIVE: Reversible drive with 24" belt take-up.
NOSE-OVER: Provides smooth transition from incline to horizonal position. Single nose-over adjust 0-20 degrees; double nose-over adjust 0-35 degrees.
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable.
BELT SPEED: 60 FPM, constant.
BED:7" x 12 ga. channel frame with 14 ga. slider bed.
FLOOR SUPPORTS: Optional
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN:Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
ELECTRICAL CONTROLS: Optional.



700 Slider Bed Belt Conveyor Medium Duty (700SB)



BELTING:PVC-120 black.
DRIVE PULLEY: 4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
TAIL PULLEY: 4" dia., crowned, with 1-3/16" dia. shaft.
END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application.
TAKE-UP: Screw type unit at tail pulley provides 12" belt take-up.
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
RETURN ROLLERS:1.9" dia. x 16 ga. steel, model 196S, adjustable.
BELT SPEED: 60 FPM, constant.
BED:7" x 12 ga. channel frame with 14 ga. slider bed 9"-27" BF; 12 ga. bed 33" BF and above with bed pan braces.
FLOOR SUPPORTS: Optional
MOTOR DRIVE:1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
SAFETY POP-OUT ROLLERS: Standard on both ends, 1.9" dia x 16 ga. steel roller, model 196S.
ELECTRICAL CONTROLS: Optional.



725TB Conveyor



BELTING: PVC-120 black.
DRIVE PULLEY: 4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
TAIL PULLEY: 4" dia., crowned, with 1-3/16" dia. shaft.
END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application.
TAKE-UP: Screw type unit at tail pulley provides 12" belt take-up.
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable.
BELT SPEED: 60 FPM, constant.
BED: 7" deep x 12 ga. box type bed with bed pan braces (all widths) and with 2-1/2" deep x 12 ga. formed trough with formed flanges on sides to provide extra strength.
FLOOR SUPPORTS: Optional
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
SAFETY POP-OUT ROLLERS: Standard on both ends, 1.9" dia x 16 ga. steel roller, model 196S.
ELECTRICAL CONTROLS: Optional



751 Roller Bed Belt Conveyor Heavy Duty (751RB)



BELTING: PVC-120 black.
DRIVE PULLEY: 8" dia. with 1-7/16" dia. shaft on 15"-39" BF; 12" dia. with 1-15/16" dia. shaft above 39" BF; both crowned and fully lagged.
CARRIER ROLLERS: 2-1/2" dia. x 11 ga. steel, model 251S.
TAIL PULLEY: 4" dia. with 1-3/16" dia. shaft on 15"-39" BF; 6" dia. with 1-7/16" dia. shaft above 39" BF; both crowned.
END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application.
SQUARING RODS: Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'.
TAKE-UP: Screw type unit at tail pulley provides 12" belt take-up.
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable.
BELT SPEED: 35 FPM, constant.
BED: 7" x 10 ga. channel frame. Bed sections attached with couplings and floor supports.
FLOOR SUPPORTS: Optional
MOTOR DRIVE: 1 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
SAFETY POP-OUT ROLLERS: Standard on both ends, 1.9" dia x 12 ga. steel roller, model 192S on 15"-39"BF, 1.9" x 9 ga. steel, model 199S on 45"-57" BF.
ELECTRICAL CONTROLS: Optional



796 Roller Bed Belt Conveyor Incline (796RBF)



BELTING: Black PVC rough-top.
DRIVE PULLEY: 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
CARRIER ROLLERS: 1.9" dia. x 16 ga. steel rollers, model 196S.
TAIL PULLEY: 4" dia., crowned, with 1-3/16" dia. shaft.
CENTER DRIVE: Reversible drive with 24" belt take-up.
NOSE-OVER: Provides smooth transition from incline to horizonal position. Single nose-over adjust 0-20 degrees; double nose-over adjust 0-35 degrees.
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable.
BELT SPEED: 60 FPM, constant.
BED: 7" x 12 ga. channel frame.
FLOOR SUPPORTS: Optional
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
ELECTRICAL CONTROLS: Optional



796 Roller Bed Belt Conveyor Medium Duty (796RB)



BELTING: PVC-120 black.
DRIVE PULLEY: 4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
CARRIER ROLLERS: 1.9" dia. x 16 ga. steel rollers, model 196S.
TAIL PULLEY: 4" dia., crowned, with 1-3/16" dia. shaft.
END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application.
SQUARING RODS: Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'.
TAKE-UP: Screw type unit at tail pulley provides 12" belt take-up.
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable.
BELT SPEED:60 FPM, constant.
BED: 7" x 12 ga. channel frame. Bed sections attached with couplings and floor supports.
FLOOR SUPPORTS: Optional
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
SAFETY POP-OUT ROLLERS: Standard on both ends, 1.9" dia x 16 ga. steel roller, model 196S.
ELECTRICAL CONTROLS: Optional