Material & Handling Equipment

All-terrain pallet truck with gas-powered traction drive system, great for moving heavy loads over rough terrain, features 2000 lbs. or 4000 lbs. capacity @ 18" load center, unit also includes powered fork lift and lower, steel construction for years of dependable use with blue painted finish.

Battery Transfer Cart is designed for use with pallet trucks to load, unload, and transfer fork truck batteries. Features roller deck for easy battery movement. Front locking safety tabs to secure battery in cart. Pallet truck is not included. Welded steel construction with powder coat yellow finish. The stand alone Battery Transfer Cart, model BTC-CART, includes casters for portability. Specify roller height when ordering. Optional winch attachment, model BTC-WINCH, can be installed easily to either BTC unit with the supplied hardware. The manual winch is designed to pull battery out of fork truck.

A quick and economical way to weigh your pallets. This easy to read and operate push button scale has a +/- 6% weighing accuracy. Steel construction with a white gauge face and black weight indicator. To use simply load your pallet, raise forks completely, and push yellow lever with your foot to read weight. Weight must be evenly distributed across the fork width and length. A retrofit kit is available for field installation onto model PM5-2748 or PM5-2048 pallet trucks only.

Fully powered pallet truck for easy and quick operation. Includes fingertip raise and lower buttons. Easy-to-operate throttle for forward and reverse direction. Throttle offers infinite forward and reverse speeds. Safety features include a horn and belly reverse button. Units run off 24V batteries with battery charger standard. The 3,000 pound capacity models use two 12V batteries with 70Ah rating. The 4,500 pound capacity models use four 6V batteries with 180Ah rating. Units will typically achieve a minimum of eight (8) hours of service on one full charge.

Transport long loads down narrow aisles with this heavy-duty Sidewinder Pallet Truck. This versatile Pallet Truck retains all the quality workmanship of a standard pallet truck in addition to providing lateral movement. Simply place the forks into the pallet then elevate to approximately seven inches, rotate handle, and lock detent into place. The second set of rollers, right/left, are actuated. Now push the Side Winder perpendicular to the traditional direction.

Lifts to maximum height with just 5-6 pumps w/ no weight on the pallet truck. (weight of 300 lbs on unit or higher, takes 12-13 pumps). Reduce operating costs. An economical way for one person to move heavy pallet loads without the use of a fork truck! Includes two articulating steering wheels and two front load rollers. Ergonomic design requires only 75 pounds of pulling force when fully loaded. Steering wheels include bearing dust covers for added life. Nose wheels are located on the front edge of each fork to assist in clean pallet entrance and exit. Reinforced triple-formed steel forks provide twice the strength of standard single-formed forks. Forks are 6." wide each. Equipped with internally mounted solid steel adjustable push rods. Spring loaded handle automatically returns to vertical position when not in use. Hydraulic pump design facilitates easy-access seal replacement. Chrome-plated hydraulic pump piston for long seal life.

Hold and transport rolls of material with standard pallet trucks. Sloped ends allow for manually rolling material into position. V-shaped center holds rolls in position. Built-in fork pockets allow for movement with standard pallet truck. Heavy-duty welded steel construction with power coat finish.

Increase the raised height by 3" to handle skids with the Skid Adaptor. Adapts to most pallet trucks with an overall fork width of either 20" or 27" and a minimum fork length of 48" . Skid adaptor may be rotated into vertical position for normal pallet truck use.

Hold and transport rolls of material with standard pallet trucks. Sloped ends allow for manually rolling material into position. V-shaped center holds rolls in position. Built-in fork pockets allow for movement with standard pallet truck. Heavy-duty welded steel construction with power coat finish.

Unique turnabout pallet truck allows for turning on a dime! Special center wheels allow empty pallet truck to spin within operating space. Spring-loaded actuation does not interfere with normal operation. Offers greatly improved product maneuverability.