Plastic Belt Conveyor -

Plastic Belt Conveyor

Transportador de banda de plástico de alta resistencia (HD400PB)

La banda plana de la serie 400 se utiliza en el modelo HD400PB para cargas unitarias pesadas. Al usarla en el modelo HD400PB de Roach, se eliminan los problemas de alineación de la banda.

Transportador de banda de plástico inclinado con parte superior de fricción plana (700FFT)

El modelo 700FFT es la opción ideal para aplicaciones de manipulación de cajas de piso a piso, inclinadas o declinadas. Elimine los problemas de alineación de la banda con la banda de plástico del modelo 700FFT. La unidad se muestra con soportes y rótulas opcionales.

Transportador curvo de banda de plástico con rejilla al ras (700PBC)

Utilice el modelo 700PBC para aplicaciones que requieran curvas de 30°, 45°, 60° o 90°. También están disponibles formaciones en S con una longitud mínima de tangente central equivalente al doble del ancho de la banda. Se puede añadir una tangente recta adicional en el extremo de descarga (impulsor). (La unidad se muestra con banda blanca opcional).

Transportador de banda de plástico con parte superior de fricción (700PB)

Ideal para el transporte de mercancías generales en aplicaciones como embalaje, pruebas, inspección y diversas operaciones en líneas de montaje. El modelo 700PB elimina los problemas de alineación de la banda.

Transportador de banda de plástico con rodillos en línea (700RT)

Ideal para aplicaciones que requieren transporte y acumulación temporal. El producto se acumula con baja contrapresión mediante rodillos en línea estándar en la banda para diversas operaciones de la línea de montaje. El modelo 700RT elimina los problemas de alineación de la banda.

Transportador de banda de plástico con nervaduras elevadas (700RR)

Los transportadores con bandas de plástico con nervaduras elevadas están diseñados para transportar, acumular y transferir latas, botellas u otros artículos pequeños que normalmente son difíciles de transportar. El modelo 700RR elimina los problemas de alineación de la banda.

Transportador de banda de plástico con rodillos transversales (700TRT)

Ideal para aplicaciones que requieren transferencia de producto a 90° (activada o desactivada), centrado de producto o rotación de cajas («volteador de cajas»). El producto puede desviarse o incorporarse al transportador mediante rodillos transversales estándar en la banda. Elimine los problemas de alineación de la banda con el modelo 700TRT.

1200 Heavy Duty Plastic Belt Conveyor (HD1200PB)

BELTING: Series 1200 flat top gray polypropylene belt.
DRIVE SPROCKETS: 10.2″ pitch dia. with 2.5″ square bore.
TAIL SPROCKETS: 10.2″ pitch dia. with 2.5″ square bore.
END DRIVE: Allows one-direction (unit) operation.
BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
BED: 7″ x 1-1/2″ x 7 ga. channel frame with open style bed construction and UHMW wearstrips mounted to longitudinal channels.
TAKE-UP: Catenary type located at discharge end.
RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable with rubber sleeves.
BELT SPEED: 35 FPM, constant.
FLOOR SUPPORTS: Optional.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
ELECTRICAL CONTROLS: Optional

PPF Flat Top Plastic Belt Parts Conveyor With Flights

BELTING: Series 900 flat top gray polypropylene belt with 2″ high streamline flights on 11.9″ centers, FDA approved belting.
DRIVE SPROCKETS: 4.1″ pitch dia. with 1.5″ square bore.
TAIL SPROCKETS: 4.1″ pitch dia. with 1.5″ square bore.
END DRIVE: Allows one-direction (unit) operation.
TAKE-UP: Catenary type, underneath mounted.
BEARINGS: Drive shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
BELT SPEED: 35 FPM, constant.
BED: 8″ deep x 10 ga. enclosed box type construction with UHMW wearstrips mounted to 14 ga. steel belt return pan.
INCLINE: 30, 36 and 45 degree (specify).
PORTABLE SUPPORT: Adjustable floor supports with 4″ dia. casters & bracing.
ROLLER CHAIN: No. 50 chain provided at drive shaft. Chain take-up provided on motor base.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ELECTRICAL CONTROLS: Optional

400 Heavy Duty Plastic Belt Conveyor (HD400PB)

BELTING: Series 400 flat top gray polypropylene belt, FDA approved belt.
DRIVE SPROCKETS: 10.1″ pitch dia. with 2.5″ square bore.
TAIL SPROCKETS: 10.1″ pitch dia. with 2.5″ square bore.
END DRIVE: Allows one-direction (unit) operation.
BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
BED: 7″ x 1-1/2″ x 7 ga. channel frame with open style bed construction and UHMW wearstrips mounted to longitudinal channels.
TAKE-UP: Catenary type located at discharge end.
RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable with rubber sleeves.
BELT SPEED: 35 FPM, constant.
FLOOR SUPPORTS: Optional.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
ELECTRICAL CONTROLS: Optional

700 Flat Friction Top Inclined Plastic Belt Conveyor (700FFT)

BELTING: Series 900 flat friction top gray polypropylene belt with black rubber top modules.
DRIVE SPROCKETS: 6.1″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 6.1″ pitch dia. with 2.5″ square bore and 6.8″ pitch dia. sprockets with 1.5″ or 2.5″ square bore.
TAIL SPROCKETS: 6.1″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 6.1″ pitch dia. with 2.5″ square bore and 6.8″ pitch dia. sprockets with 1.5″ or 2.5″ square bore.
END DRIVE: Allows one-direction (unit) operation.
BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
BED: 7″ x 1-1/2″ x 10 ga. channel frame with open style bed construction and UHMW wearstrips mounted to longitudinal channels.
TAKE-UP: Catenary type located at discharge end.
RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable with rubber sleeves.
BELT SPEED: 60 FPM, constant.
FLOOR SUPPORTS: Optional.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
ELECTRICAL CONTROLS: Optional

700 Flush Grid Plastic Belt Curve Conveyor (700PBC)

BELTING: Series 2200 flush grid gray curved polypropylene belt, FDA & USDA approved belting.
DRIVE SPROCKETS: 5.3″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 6.3″ or 7.7″ pitch dia. sprockets with 1.5″ or 2.5″ square bore.
TAIL SPROCKETS: 5.3″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 6.3″ or 7.7″ pitch dia. sprockets with 1.5″ or 2.5″ square bore.
END DRIVE: Allows one-direction operation ONLY; this conveyor is NOT reversible.
BEARINGS: End shafts are supported by precision, heavy duty, lubricated, ball bearing units with cast iron housings.
BED: 7″ x 1-1/2″ x 10 ga. formed steel channel frame with UHWW wearstrips attached to bed and belt return pan.
TAKE-UP: Catenary type located at discharge end.
MINIMUM RADIUS: 2.2 x belt width, measured from inside edge of belt.
TANGENTS: Minimum length is 1.5 x belt width located at each end of conveyor; minimum of 3′ at discharge end required with 5′ recommended. Optional additional tangent may be located at discharge end.
BELT SPEED: 60 FPM, constant.
FLOOR SUPPORT: Optional.
DIRECTION OF FLOW: Specify right hand or left hand.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor on 45 degree and 90 degree curves; 3/4 HP supplied on all 180 degree curves.
ROLLER CHAIN: Drive shaft is driven by No. 50 chain.
ELECTRICAL CONTROLS: Optional

700 Friction Top Plastic Belt Conveyor (700PB)

BELTING: Series 900 flat top gray polypropylene belt, FDA approved belt.
DRIVE SPROCKETS: 4.1″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 6.1″ or 6.8″ pitch dia. sprockets with 1.5″ or 2.5″ square bore.
TAIL SPROCKETS: 4.1″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 6.1″ or 6.8″ pitch dia. sprockets with 1.5″ or 2.5″ square bore.
END DRIVE: Allows one-direction (unit) operation.
BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
BED: 7″ x 1-1/2″ x 10 ga. channel frame with open style bed construction and UHMW wearstrips mounted to longitudinal channels.
TAKE-UP: Catenary type located at discharge end.
RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable with rubber sleeves.
BELT SPEED: 60 FPM, constant.
FLOOR SUPPORT: Optional.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
ELECTRICAL CONTROLS: Optional

700 Inline Roller Plastic Belt Conveyors (700RT)

BELTING: Series 400 roller top gray polypropylene belt, FDA approved belt.
DRIVE SPROCKETS: 7.8″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 10.1″ pitch dia. sprockets with 1.5″ or 2.5″ square bore.
TAIL SPROCKETS: 7.8″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 10.1″ pitch dia. sprockets with 1.5″ or 2.5″ square bore.
END DRIVE: Allows one-direction (unit) operation.
BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
BED: 7″ x 1-1/2″ x 10 ga. channel frame with open style bed construction and UHMW wearstrips mounted to longitudinal channels.
TAKE-UP: Catenary type located at discharge end.
RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable with rubber sleeves.
BELT SPEED: 60 FPM, constant.
FLOOR SUPPORT: Optional.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
ELECTRICAL CONTROLS: Optional

700 Raised Rib Plastic Belt Conveyor (700RR)

BELTING: Series 400 raised rib gray polypropylene belt, FDA approved belt. Finger transfer plates provided both ends of conveyor to facilitate smooth product transfer.
DRIVE SPROCKETS: 7.8″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 10.1″ pitch dia. sprockets with 1.5″ or 2.5″ square bore.
TAIL SPROCKETS: 7.8″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 10.1″ pitch dia. sprockets with 1.5″ or 2.5″ square bore.
END DRIVE: Allows one-direction (unit) operation.
BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
BED: 7″ x 1-1/2″ x 10 ga. channel frame with open style bed construction and UHMW wearstrips mounted to longitudinal channels.
TAKE-UP: Catenary type located at discharge end.
RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable with rubber sleeves.
BELT SPEED: 60 FPM, constant.
FLOOR SUPPORTS: Optional.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
ELECTRICAL CONTROLS: Optional

700 Transverse Roller Top Plastic Belt Conveyor (700TRT)

BELTING: Series 400 transverse roller top gray polypropylene belt with acetal rollers and stainless steel roller axles, FDA approved belting.
DRIVE SPROCKETS: 7.8″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 10.1″ pitch dia. sprockets with 1.5″ or 2.5″ square bore.
TAIL SPROCKETS: 7.8″ pitch dia. with 1.5″ square bore. Available with OPTIONAL 10.1″ pitch dia. sprockets with 1.5″ or 2.5″ square bore.
END DRIVE: Allows one-direction (unit) operation.
BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
BED: 7″ x 1-1/2″ x 10 ga. channel frame with open style bed construction and UHMW wearstrips mounted to longitudinal channels.
TAKE-UP: Catenary type located at discharge end.
RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable with rubber sleeves.
BELT SPEED: 60 FPM, constant.
FLOOR SUPPORT: Optional.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
ELECTRICAL CONTROLS: Optional

1200 Heavy Duty Plastic Belt Conveyor (HD1200PB)

PPF Flat Top Plastic Belt Parts Conveyor With Flights

Big or small, our services are tailored to your project.

No matter the size of your project, we offer services that will allow us to handle the job from beginning to end. From consulting to design, installation to support, we’ll design a solution that meets your needs!

Before making any recommendations, our system design specialists will work with you to carefully analyze your operational requirements and identify current issues to determine your specific needs. We want to understand your facility configuration, capacity and order size, reporting and control requirements and other variables. In other words, we want to understand your business needs and provide a design with those in mind.

Our award winning engineering department can design your warehouse solution from beginning to end, including hardware, controls, electronics, and pneumatics. We will take care of every facet to create a design which will have your operation running smoothly and assist in increasing your overall efficiency.

As part of the engineering effort, we will bring your design to life, so you can see exactly how every part of your system will operate before you make the decision to move forward. We feel that this is an integral part of the process in order to show full system layout as well as exactly how we are helping to solve your issues.

Virtual reality is an engineering tool that will allow the customer to “walk” through their completed warehouse design to evaluate the flow and positioning of items so that changes can be made prior to the beginning of installation. This could also be used to determine interactions within the warehouse, such as between AGV’s and personnel, to maximize safety.

Installation will be completed by our highly trained staff, which has over 30 years of experience in field installations. Whether it is mechanical, electrical or pneumatic installations, you can be sure that our team will surpass your expectations and install your solution with unsurpassed quality and professionalism.

From the smallest component to the largest carrier, Conveyroll solutions are unsurpassed in performance and reliability. We have built our reputation on a constant commitment to quality, and we share that commitment with you in the form of ongoing service and support. If you have any issues with your system, simply contact us and we will resolve the issue and get your system back up and running in minimal time.