EN|SP

Selected:

HEAVY DUTY CAM ADJUSTED LIVE ROLLER

$3,038.59$22,545.00

HEAVY DUTY CAM ADJUSTED LIVE ROLLER

$3,038.59$22,545.00

PRICES IN DOLLARS, SECTION 10′

Trumann free on board

SPECIFICATIONS
TREAD ROLLERS: 2-1/2” dia. x 11 ga. steel, model 251S.
PRESSURE ROLLERS: 1.9” dia. x 16 ga. steel, model 196S; same BF as conveyor up to 39” BF;
units 43” BF and above, rollers are 21” BF with STANDARD 12” wide belt; 27” BF if OPTIONAL 24”
belt is used.
BELTING: 12” wide PVC-120.
RETURN ROLLERS: 1.9” dia. x 16 ga. steel, model 196S, adjustable.
CENTER DRIVE: Reversible drive with 24” integral belt take-up. Specify location. For units
under 8’-0” overall length, drive components must be stacked.
END PULLEY: 4” dia. with 1-3/16” dia. shaft on 15”-39” BF; 6” dia. with 1-7/16” dia. shaft above 39”
BF; both crowned.
DRIVE PULLEY: 8” dia. with 1-7/16” dia. shaft on 15”-39” BF; 12” dia. with 1-15/16” dia. shaft above
39” BF; both crowned and fully lagged.
BEARINGS: Precision ABEC bearings.
BED: 7” x 1-1/2” x 10 ga. formed steel channel frame slotted for tread rollers to pop-out. When
unit is installed at 7’-0” elevation or higher, rollers must be retained in conveyor frame. Specify
desired elevation. Bed sections attached with couplings and floor supports.
MOTOR DRIVE: 1 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
SPEED: 35 FPM, constant.
ROLLER CHAIN: Drive pulley is driven by No. 50 chain for 1-1/2 HP or less and No. 60 chain on
larger drives. Chain take-up provided on motor base.
ELECTRICAL CONTROLS: Optional.

Clear

Description

251CALR is the choice to horizontally convey heavier unit loads where transfers, side loading or unloading is required. Its standard center drive allows for reversible operation.

PRICES INCLUDE
TREAD ROLLERS: 2-1/2” dia. x 11 ga. steel rollers
PRESSURE ROLLERS: 1.9” dia. x 16 ga. steel
B E LT: 12” wide Black PVC-120 (COS) q REVERSIBLE
DRIVE: with 24”
integral belt take-up
BED: 7” x 1-1/2” x 10 ga. steel channel frame
SPEED: 35 fpm
END PULLEY: 4” dia. with 1-3/16” dia. shaft on 15”-39” BF;
6” dia. with 1-7/16” dia. shaft above 39” BF; both crowned
DRIVE PULLEY: 8” dia. with 1-7/16” dia. shaft on 15”-39”
BF; 12” dia. with
1-15/16” dia. shaft above 39” BF; both crowned and lagged
1 HP ODP MOTOR (230/460/3)
LESS SUPPORTS

Additional information

Weight N/A
Lenght

10´, 20´, 30´, 40´, 50´, 60´, 70´, 80´, 90´, 100´

BF

15", 21", 27", 33", 39"

Reviews

There are no reviews yet.

Be the first to review “HEAVY DUTY CAM ADJUSTED LIVE ROLLER”

Your email address will not be published. Required fields are marked *

×
×

Cart