EN|SP

Selected:

MEDIUM DUTY CAM ADJUSTED LIVE ROLLER

$2,364.29$6,130.08

MEDIUM DUTY CAM ADJUSTED LIVE ROLLER

$2,364.29$6,130.08

PRICES IN DOLLARS, SECTION 10′

Trumann free on board

SPECIFICATIONS
TREAD ROLLERS: 1.9” dia. x 16 ga. Steel rollers, model 196S.
PRESSURE ROLLERS: 1.9” dia. x 16 ga. steel, model 196S, cam adjustable.
BELTING: 6” wide black PVC-120 COS.
CENTER DRIVE: Reversible drive with 24” integral belt take-up. For units under 8’-0” overall length, drive components must be stacked. Consult factory for minimum unit elevation.
SQUARING RODS: Adjustable rods on underside of bed allow frame to be squared for improved belt tracking  and are standard on all units over 30’.
DRIVE PULLEY: 4” dia. with 1-3/16” dia. shaft or 8” dia. with 1-7/16” dia. shaft, both crowned and fully lagged.
END PULLEY: 4” dia., crowned, with 1-3/16” dia. shaft.
RETURN ROLLERS: 1.9” dia. x 16 ga. steel, model 196S, adjustable.
BED: 7” x 1-1/2” x 12 ga. Channel frame slotted for tread rollers to pop-out. When unit is installed at 7’-0” elevation  or higher, rollers must be retained in conveyor frame. Specify desired elevation. Bed sections attached with couplings and floor supports.
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger  drives. Chain take-up provided on motor base.
SPEED: 60 FPM, constant.
ELECTRICAL CONTROLS: Optional.

Clear

Description

Roach 796CALR is ideally suited for side loading, unloading or temporary accumulation. Its unique cam allows tread roller drive pressure to be adjusted in only seconds.

PRICES INCLUDE
TREAD ROLLERS: 1.9” dia. x 16 ga. steel rollers on 3” centers
PRESSURE ROLLERS: 1.9” dia. x 16 ga. galvanized
B E LT: 6”wide black PVC-120 (COS)
REVERSIBLE CENTER DRIVE: with 24” integral belt take-up
SPEED: 60 fpm
DRIVE PULLEY: 4” dia.with 1-3/16” dia. shaft or 8” dia. with 1-7/16” dia. shaft both crowned and lagged
BED: 7” x 1-1/2” x 12 ga. channel frame 1/3 HP ODP MOTOR (230/460/3)
LESS SUPPORTSF

BF 15" 21" 27"
OAW 18" 24" 30"
Lenght Pulley OD Price WT. (Lbs.) Price WT. (Lbs.) Price WT. (Lbs.)
10" 4" 2364.29 489 2518.85 584 2691.92 678
20" 4" 3032.44 755 3269.11 912 3552.47 678
30" 4" 3699.78 1021 4017.76 1240 4411.40 1458
40" 4" 4368.74 1287 4767.21 1568 5271.14 1848
50" 4" 5036.89 1553 5517.47 1896 6130.08 2238

Additional information

Weight N/A
Lenght

10´, 20´, 30´, 40´, 50´

BF

15", 21", 27"

Reviews

There are no reviews yet.

Be the first to review “MEDIUM DUTY CAM ADJUSTED LIVE ROLLER”

Your email address will not be published. Required fields are marked *

×
×

Cart